STERLING HEIGHTS:
DEARBORN HEIGHTS:
Gravel, salt and slush wear down exposed paint all winter. TintedAF installs STEK paint protection film in Detroit, MI from our Dearborn Heights shop, with clear gloss, matte and satin finishes and coverage from high-impact areas to the full vehicle.
Detroit drivers face gravel, construction debris and tire spray on I-94, I-75 and M-10 almost every day. Each stone that hits the hood or bumper leaves a chip, and chips let corrosion start. Paint protection film takes those hits so the factory paint underneath does not.
Winter adds road salt and slush that cling to the front end, and summer brings insects that bake onto the bumper. Film gives the paint a physical barrier against all of it. Regular washing still matters in Michigan, but the film keeps the paint beneath it from taking the abuse.
Our Dearborn Heights shop brings more than 5 years of hands-on PPF experience to every single job. We install STEK film, cut each pattern by computer and work indoors, and STEK installs currently carry a 10-year warranty. Ask us for the written terms before you book.
Paint protection film doesn’t have to change your vehicle’s original look. It can preserve the existing finish or intentionally change the appearance depending on the film selected.
Gloss clear film keeps the factory shine while it guards against rock chips and road debris. It is the usual choice for new cars and daily drivers because the film is meant to look like part of the paint. We match the coverage to your vehicle and driving.
Matte and satin film reduces shine and gives paint a softer, modern look. It works for owners who want protection with a different finish than factory gloss. Our team can talk you through both finishes, so you know exactly the look before the film goes on.
Colored PPF adds a custom look while it protects the paint underneath. Select colors are available, and we review the options for your vehicle during the consultation. It suits drivers who want protection and a change of appearance in a single install.
Self-healing film uses heat to reduce light swirl marks and minor scuffs on the film surface. That keeps the surface looking smooth between visits. Deep damage can still call for full film replacement, and we explain what to expect before you decide to book.
Partial Front covers the front bumper, part of the hood and fenders, and the mirrors. It targets the spots that take the most stone hits and is the least expensive way to start. Many Detroit commuters choose it for daily protection on a tighter budget.
Full Front covers the full hood and front fenders, plus the front bumper, headlights and mirrors. The whole leading edge gets film, so the areas that face the road get protection from end to end. Highway commuters often choose this level of coverage.
Performance Track extends full front-end film to the rocker panels, A-pillars, door cups and edges, and the rear bumper impact area. It is built for cars that see spirited driving and tight parking lots, where more of the body takes contact and chips.
Full Vehicle covers painted surfaces from front to rear, including panels, bumpers, doors, roof, quarter panels, the trunk or liftgate, mirrors and rocker panels. It gives owners the most complete protection, with one uniform look across the whole car.
Front bumpers, hoods, fenders, mirrors, and rocker panels are constantly exposed to gravel and debris thrown up by surrounding traffic. PPF places a physical film layer between those hazards and the factory finish.
Light swirl marks and minor scratches in the film can become less visible as heat activates the self-healing top layer. This can help maintain a smoother appearance during normal use.
PPF gives contaminants another surface to contact before reaching the original paint. Prompt washing remains important, especially after long highway drives or winter road exposure.
Clear PPF lets the original paint color and finish stay visible while adding surface protection. This makes it particularly useful for new vehicles and owners who want to preserve factory paint.
PPF is available in finishes beyond traditional clear gloss. Matte, satin, and colored options can alter the vehicle’s appearance while still providing physical film coverage.
Want PPF pricing for your vehicle? Call or visit our shop, and we will build a quote around your coverage, finish and paint condition. Tell us the make and model, and we will recommend a package that fits how you drive.
fit the panel shapes before application begins, and we confirm the coverage with you first.
Model 3, Model Y, Model S, Model X and Cybertruck owners consider PPF for the front bumper, hood, fenders and rocker panels. Those are the areas that collect the most stone chips on highways. Our Tesla brand page has more details on the models we protect.
BMW, Porsche, Corvette and exotic cars can get targeted coverage or full-body film based on your goals. Many owners start with the front end and add panels later. Our Porsche and BMW brand pages have more details on those vehicles and how we protect them.
Trucks and SUVs have larger front surfaces, so they can take partial, full-front or extended coverage. Tall bumpers and wide hoods collect gravel and insects fast on the highway. Our Ford brand page has more details on the trucks and SUVs we protect.
We have over five years of hands-on PPF work on many panel shapes and vehicle types. That experience shows in how we plan coverage, handle tight curves and finish edges, and it means we can tell you honestly which package fits your car and your budget.
We currently install STEK paint protection film. The right film depends on your coverage, finish and vehicle, and we explain the options during your consultation. You get a film brand you can ask about by name and a clear answer on what goes on the car.
STEK installs from our shop currently include a 10-year warranty. Ask for the written terms for your specific film before you book, and we will walk you through what the warranty covers, so you understand the protection behind the work after you drive away.
Vehicle-specific patterns are cut by computer so the film fits each panel shape before application. Precise patterns support clean edges and consistent coverage on curved bumpers, mirrors and fenders, and they avoid cutting on your paint with a blade.
Every single install happens indoors in our shop, where we control contamination and inspect each panel under good light. Dust and wind are the enemies of a clean film install, and a controlled space keeps both away from your car while the film goes on.
OUR PROCESS
We review your vehicle and your goals, then inspect the paint and explain the coverage options. This step sets the finish, the package and the quote, so you know what the film will protect and what it will cost before any work begins on the car at our shop.
The car is washed, decontaminated and prepped so the film bonds to a clean surface. Dirt, wax and bonded grit under the film show up later as specks and lifting, so this step takes real time, especially on a car that has seen a long Michigan winter.
Next, we inspect the paint for chips, swirls and defects. Film shows what sits under it, so we point out existing flaws and explain what the film will and will not hide. You will know the real starting condition of your paint before the film goes on.
Computer-cut patterns for your vehicle are positioned panel by panel. Pre-cut film fits the shapes of the bumper, hood and fenders without a blade touching your paint, which keeps the edges clean and the coverage consistent from one panel to the next.
Last, we finish the edges and check clarity, edge quality and adhesion across every panel. You get care guidance before you leave, including how to wash the car, so the film holds up through Michigan salt, slush and summer road grime for years to come.
PPF cost depends on your vehicle and the coverage level, and partial front is the least expensive package. Quotes are vehicle-specific, so we look at your car before we give a number. Our Michigan PPF cost guide breaks down the factors in more detail for Detroit drivers.
Read the Michigan Paint Protection Film Cost Guide before you request a quote.
PPF and ceramic coating protect a vehicle differently, and one does not completely replace the other.
PPF is a physical polyurethane film installed over paint.
It is primarily used for:
Ceramic coating is a liquid product that bonds to the prepared exterior surface.
It is primarily used for:
Searching for paint protection film near me in Detroit? TintedAF serves Detroit-area drivers from its Dearborn Heights and Sterling Heights shops. Choose the location that works best for your part of Metro Detroit and contact the team with your vehicle year, make, model, and desired PPF coverage.
Protect your paint before another Michigan winter hits. Call the Dearborn Heights shop at (313) 674-0776 for a free PPF quote, and we will help you choose the right film and coverage for your vehicle and the way you drive daily.
Detroit is the largest city in Michigan and the center of the Metro Detroit automotive region. Major routes such as I-75, I-94, M-10, Michigan Avenue, Woodward Avenue, and Gratiot Avenue connect Downtown Detroit with surrounding neighborhoods, suburbs, workplaces, entertainment districts, and regional highways.
Driving conditions change throughout the year. Highway debris, construction zones, gravel, insects, winter salt, slush, and everyday traffic can leave exposed paint vulnerable to chips and surface wear. PPF provides a physical film layer for drivers who want additional protection on high-impact exterior panels.
TintedAF serves Detroit vehicle owners from nearby shops in Dearborn Heights and Sterling Heights. With 5+ years of experience, STEK paint protection film, multiple PPF finishes, and a current 10-year warranty, our team helps drivers choose coverage based on the vehicle and the way it is used.
PPF cost depends on your vehicle, the coverage level, the finish, panel complexity, paint condition and whether old film needs removal. Partial front is the least expensive package. We give vehicle-specific quotes, so call or visit our shop and we will price the exact coverage you want for your car.
For many Detroit commuters, yes. Full front covers the hood, fenders, bumper, headlights and mirrors, which are the parts that take the most gravel and debris on I-94, I-75 and M-10. It costs more than partial front, but it protects more paint and leaves fewer exposed edges on the front of the car as well.
Partial Front covers the front bumper, part of the hood and fenders, and the mirrors. Full Front covers the full hood and front fenders, plus the bumper, headlights and mirrors. Full Front protects more of the leading edge, while Partial Front costs less. We can help you choose based on your driving.
Self-healing PPF reduces light swirl marks and minor scuffs on the film surface when it is warmed by sun or warm water. It does not erase deep gouges or cuts, and damaged film may need replacement. It keeps the film looking smooth for daily driving, and we explain the limits clearly before you book.
Clear PPF keeps the factory shine and is meant to blend into the paint. Matte and satin PPF reduces shine and gives the paint a softer finish. Both finishes protect against rock chips and road debris, so the choice comes down to the look you want. We can show you both finishes at the shop before you decide.
Yes, many owners combine them. PPF guards against rock chips and impact, and ceramic coating helps with water behavior, easier washing and gloss. They do different jobs, so one does not fully replace the other. Ask about a PPF and ceramic coating package, and we will plan both together for your car.
Yes. Michigan winters bring salt and slush that cling to the front end, and the film gives the paint a physical barrier against them. You still need to wash the car regularly, because salt left on any surface causes problems. Film helps protect the paint underneath while you keep the car clean all season.
STEK PPF installs from our shop currently include a 10-year warranty. Ask for the written terms for your specific film before you book. We will explain what the warranty covers and how to care for the film, so you know exactly what protection comes with the work as soon as you drive home from the shop.
We install paint protection film at our Dearborn Heights shop, 6216 N Telegraph Rd, open Monday to Saturday and closed Sunday. We serve Detroit and nearby Metro Detroit drivers and give free quotes. Call ahead or stop in during open hours, and we will plan the right film coverage for your car and your budget.
Faqs